12. WEIGHT AND BALANCE DATA -- N/A.
13. QUALITY ASSURANCE REQUIREMENTS --
13.1 General quality assurance inspection criteria shall be in accordance with (MIL-Q-9858A).
13.2 Have installation inspected.
13.3 Ensure verification is properly recorded to show TB compliance (para 14).
RECORDING AND REPORTING OF THE MODIFICATION --
14.1 Records and Reports.
14.1.1 The following forms are applicable and are to be completed in accordance with DA PAM 738-751,
220.127.116.11 Add entry on the DA Form 2408-13-1 that will remain on the aircraft forms and records until the
aircraft is returned to original configuration. TB 1-1520-238-20-135 has been applied to the M/R head and
blades. Any component changes to any of these parts must meet the requirements of the TB Para 10.16.
18.104.22.168 Add entry on the DA Form 2408-5-1 for each component (M/R Head and Blades) stating: TB
1-1520-238-20-135 has been applied; any component changes must meet the requirements of this TB.
22.214.171.124 Add entry on the DA Form 2408-15 stating: TB1-1520-238-20-135 has been applied to the M/R
head and blades. Any component changes to any of these parts must meet the requirements of the TB.
14.1.2 Technical point of contact for this TB is: Mr. Eric Shull SAFE-AV-AAH-SA, DSN 897-4205 or
commercial (256) 313-4205.
Datafax is DSN 897-4374 or (256) 313-4374.
E-mail is Er-
14.1.3 Logistical point
of contact for this
TB is: Mr. Mike Glazik SAFE-AV-AAH-LF, DSN 897-4065
commercial (256) 313-4065. Datafax is DSN 897-4374 or (256) 313-4374. E-mail is Mike.gla-
NARRATIVE AND GRAPHIC DESCRIPTION OF TB. Not applicable
FOR THE COMMANDER:
PETER J. SCHOOMAKER
General, United States Army
Chief of Staff
JOEL B. HUDSON
Administrative Assistant to the
Secretary of the Army
To be distributed in accordance with initial distribution number (IDN) 314091, requirements for