Ensure locking mechanism on nut (16) is fully released prior to re-
moval of nut (16) from splined output adapter (19).
Apply direct pressure downward onto spanner wrench during removal of nut
7.12 Using spanner wrench (P/N 298168-1, Figure 5) remove nut (16) from splined output adapter (19) and
7.13 Remove six bolts (21) - retain for reinstallation.
Using Arbor Press Position parts, along with proper tooling, onto base of
arbor press. Align parts and carefully apply pressure to tooling to start re-
moval process. When alignment is assured, press part to separate.
7.14 Place output housing assembly (11) on holding fixture (P/N 296844-1, Figure 2) with the bolt side
against the holding fixture. Make sure output housing assembly is centered in holding fixture. Using arbor
press and press tool (P/N 298530-5, Figure 6), press the splined output adapter (19) through the rotating
flange (17). Place output housing on work bench. Do not lift output housing (26) by holding the rotating flange