12. SPECIAL TOOLS, JIGS AND FIXTURES REQUIRED.
12.1 Special Tools Required.
Clutch Bearing Tool Kit
Splined Output Adapter Holder
Bearing Installation Driver
Seal Forming Tool
Seal Installation Tool
Modified Center Punch
13.1 Category of Maintenance. AVIM.
13.2 Time Required.
13.2.1 Total of 1 person to inspect, 2 persons to perform disassembly and assembly.
13.2.2 Estimated man-hours to accomplish this task is 4 hours.
13.3 TB/MWO/ECP to be applied prior to or concurrently with this Technical Bulletin: None.
13.4 Publications which require change as a result of this inspection/technical bulletin: Not applicable.
13.5 Deferred Maintenance to be accomplished concurrently with this inspection: As required.
14.1 TM 1-1520-238-23, Aviation Unit and Intermediate Maintenance Manual, Army Model AH-64A Heli-
14.2 TM 1-1500-204-23 General Aircraft Maintenance Manual.
14.3 TM 55-1500-344-23 Aircraft Weapon Systems Cleaning and Corrosion Control.
14.4 TM 1-1520-Longbow/Apache Interactive Electronic Technical Manual (IETM) for Longbow/Apache.
15. RECORDING AND REPORTING REQUIREMENTS.
15.1 Reporting compliance suspense date (aircraft). Upon entering requirements of this Technical Bulletin
on DA Form 2408-13, forward compliance message, the report will cite this Technical Bulletin number, date
of entry in DA Form 2408-13, aircraft mission design series and serial numbers of aircraft in numerical order.
15.2 Task/Inspection Reporting Suspense Date (aircraft). N/A.
15.3 Reporting Compliance Suspense Date (spares). N/A.
15.4 Task/Inspection Reporting Suspense Date (spares). N/A.
15.5 The following forms are applicable and are to be completed in accordance with DA Pam 738-751, dated
15 March 1999.
15.5.1 DA Form 2408-5 Equipment Modification Record (aircraft).
15.5.2 DA Form 2408-13 Aircraft Inspection and Maintenance Record.