DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
REPLACEMENT OF FLANGE RING ON ELECTRICAL
POWER -- GENERATOR, A.C. FOR AH-64D
Headquarters, Department of the Army, Washington, D.C.
5 NOVEMBER 2004
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this publication. If you find any mistakes or if you know of a way to
improve the procedures, please let us know. Mail your letter or DA Form 2028 (Recommended
Changes to Publications and Blank Forms) directly to: Commander, US Army Aviation and
Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5230. You
may also submit your recommended changes by E-Mail directly to firstname.lastname@example.org
or by fax (256) 842-6546/DSN 788-6546. A reply will be furnished directly to you. Instruction
for sending an electronic 2028 may be found at the back of this publication.
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
1. PURPOSE. -- The purpose of this TB is to provide a process that removes the existing flange ring and
replaces it with a new one of the same part number, however it is attached using seven rivets and H3151
2. PRIORITY. This TB is classified "URGENT".
3. END ITEM. The following end items shall have the hardware and bonding jumpers installed
4. PARTS AND MATERIAL.
NATIONAL STOCK NUMBER