High Action Display Weapons Status continued
FIRE . . . MISSILES
The minimum launch separation time has elapsed in a
rapid fire missile engagement. The prompt is displayed
whenever more than one missile is present on the priority
channel after launch of a missile. This message is
displayed for 2 seconds.
Displayed if training missiles are being used in place of
MSL LNCH. This message is displayed for 2 seconds.
Growth position for RF/IR missile seekers.
Missiles selected on each channel have locked onto and
are tracking laser energy of two different codes.
Missiles selected on the priority channel have locked onto
and are tracking laser energy.
Missiles selected on the alternate channel have locked
onto and are tracking laser energy.
If no channels are tracking, the weapon status section will
display the delivery mode and the firing delivery messages
which are HI, LO, DIR, or LOBL. The fire delivery
messages are NORM, STBY, MANL, or RIPL (i.e.,
LASE 1 . . . TARGET
LASE 2 . . . TARGET
LASE 3 . . . TARGET
LASE 4 . . . TARGET
LASE 16 . . . TARGET
The laser designator must be lasing the target for missile
terminal guidance. This message is displayed during the
last 8 seconds of the calculated missile time of flight in
place of the TOF-TT message.
Missiles have been actioned, but no missiles have been
Rockets have been actioned, but no zone has been
selected for firing.
A weapon system has been actioned but the SIGHT SEL
switch is in STBY.
The FCC has detected an alteration of internal values
affecting pylon boresight harmonization. The pylons,
rockets and missile subsystems will function normally but
without pylon boresight corrections.
DNS FLYTO data validation (wrap) error