FUEL SERVICING SINGLE POINT ADAPTER (SPA) METHOD continued
e. Connect single point adapter nozzle (7) to
(1) Connect nozzle ground plug (9) to grounding
(2) Remove cap (11) from adapter (8).
(3) Connect nozzle (7) to adapter (8) and turn
clockwise until it locks.
To prevent damage to the fuel system, do
not exceed 50 psi fueling pressure.
f. To start refueling, lift valve handle (12) to
g. Place FWD and AFT TNK LEVEL CONT
VALVES switches (13) to CLOSE.
The fuel system may be damaged if FWD
CLOSED and AFT CLOSED indicators
do not light within 8 seconds after fuel
servicing begins. If indicators do not light,
automatic fuel shutoff has not actuated.
Stop fuel servicing.
h. Check that indicators FWD CLOSED and AFT
CLOSED (14) light within 8 seconds after fuel
(1) Stop fuel servicing if indicators do not light
GO TO NEXT PAGE