1.108A, MAIN ROTOR TRACK AND BALANCE AVA KIT INSTALLATION continued
c. Place a single, 5-feet strip of reflective tape on
underside, trailing edge (on trim tab) of each
blade from tab pocket #0 to tab pocket #5.
Ensure that tape is smooth and as straight as
possible using edge of blade as a reference.
Use maintenance platform.
d. If verification of tape is desired, it can be
viewed by holding a flashlight near your head
and shining it at rotating blades. Any mis-
placed sections of tape will stand out.
e. Inspect (QA).
f. Perform main rotor track and balance mainte-
nance operational check (TM 1-1520-238-T).
END OF TASK
BLADE LEADING EDGE
All data on page 1328 including Paragraph 1.109 deleted