TM 1-1520-238-23
2-111
2.38.
GUN AND AMMO SUPPORT FORWARD MOUNT PADS SLEEVE BUSHING REPLACEMENT
(AVIM) continued
b. Install new bushing (5) in support (3).
(1) Place bushing (5) in carbon dioxide (item 40,
App F) for 5 MINUTES.
(2) Apply heat to support (3) bushing bore area.
Use heater.
(3) Coat outside of bushing (5) and support (3)
bushing bore. Use primer coating (item 147,
App F) and brush (item 34, App F).
(4) Press bushing (5) in support (3) bushing bore
until seated or pressed flush with mating sur-
face.
(5) Allow parts to return to room temperature.
c. Install nutplate (1) and spacer (2) in support
(3).
(1) Position nutplate (1) and spacer (2) in support
(3).
(2) Install two new rivets (4) through nutplate (1),
spacer
(2),
and
support
(3)
(TM 1-1500-204-23)
d. Inspect (QA).
END OF TASK
4
4
1
2
3
5
M04-4554-3