PILOT DOOR TRANSPARENT PANEL ASSEMBLY REMOVAL/INSTALLATION continued
a. Clean adhesive residue from door (para 1.47).
b. Wipe door and fixed canopy with a clean rag.
c. Clean protective latex coating from replace-
ment panel if it does not peel off cleanly. Use
isopropyl alcohol (item 106, App F) and cloth
(item 52, App F).
a. Check door and fixed canopy for cracks and
wear (para 2.12).
b. Check door for corrosion (para 1.49).
c. Check door for damaged screw holes
d. Check for discrepant screws.
(1) 25 percent of screws can be discrepant if
scattered randomly. Maximum of three con-
secutive bad screws allowed.
e. Check for loose or damaged nutplates. Re-
place if found (TM 1-1500-204-23).
a. Apply a 0.125 INCH wide bead of adhesive
around door (3) cavity. Use adhesive (item 14,
b. Install four sections of seal (11) in door (3)
cavity (para 2.52).
GO TO NEXT PAGE