TM 1-1520-238-23
4-48
4.17.
ENGINE TEARDOWN NO. 1 ENGINE WIRING REMOVAL continued
4.17.3. Removal
a. Remove wire harness support clamp (1) from
C-sump seal pressure tube (2).
(1) Hold screw (3). Remove nut (4) and washer
(5).
(2) Remove screw (3) from clamps (1) and (6).
b. Remove wire harness support clamp (7) from
angle bracket (8).
(1) Hold screw (9). Remove nut (10) and washer
(11).
(2) Remove screw (9) from clamp (7) and brack-
et (8).
c. Remove wire harness support clamp (12) from
clamp (13).
(1) Hold screw (14). Remove nut (15) and wash-
er (16).
(2) Remove screw (14) from clamps (13) and
(12).
GO TO NEXT PAGE
M04-1335-2
3
1
2
5
4
13
12
16
14
11
7
8
10
9
6
15