TM 1-1520-238-23
5-269
5.62.
TAIL ROTOR HUB IDENTIFICATION PLATE REPLACEMENT continued
5.62.3. Removal
a. Record all data on identification plate (1).
b. Remove plate (1) from tail rotor hub (2).
(1) Peel up corner of plate (1). Use putty knife.
(2) Remove plate (1) from hub (2).
(3) Discard plate (1).
5.62.4. Cleaning
CAUTION
Do not use trichloroethane, chlorofluo-
roethane, or any other product with
chlor in the name, for cleaning titanium,
magnesium, aluminium, or galvanized
metals. Products with chlor in the name
are corrosive to these metals.
NOTE
Wear clean gloves (item 82, App F)
when handling fork.
Do not allow alcohol to evaporate from
surface. Discoloration will occur.
a. Clean plate mounting area on hub (para 1.47).
(1) Ensure cured compound is completely re-
moved from hub. Use isopropyl alcohol
(item 106, App F) and cloth (item 51, App F).
b. Rinse hub and wipe dry. Use distilled water
(item 73, App F) and cloth (item 52, App F).
GO TO NEXT PAGE
M04-3822-1
2
1