TM 1-1520-238-23
4-167
4.53.
NO. 2 ENGINE INSTALLATION INSTALL IN NACELLE continued
d. Install two new packings (5) in air connect
housing (6).
(1) Slide housing (6) and two clamps (7) off air
tube (8).
(2) Remove and discard packings (5).
(3) Install new packings (5) at each end of hous-
ing (6).
(4) Slide housing (6) and two clamps (7) on air
tube (8).
(5) Tighten two screws (9).
CAUTION
Do not use engine accessories as hand
holds during engine positioning.
e. Lift engine (1) and position above nacelle (3).
Use crane.
CAUTION
When lowering engine into nacelle, en-
sure that all hoses, electrical plugs, lines,
and cables are free and clear of any ob-
structions.
f. Lower engine (1) into nacelle (3).
g. Inspect (QA).
GO TO NEXT PARAGRAPH
9
6
7
7
5
M04-3911-11
5
8
9
1
M04-3911-9
3