TM 1-1520-238-23
4-295
4.90.
NO. 2 ACTUATING CYLINDER REMOVAL/INSTALLATION continued
4.90.3. Removal
a. Remove air hose (1) from actuator (2).
(1) Hold nipple (3). Remove nut (4).
b. Remove clevis (5) from idler (6).
(1) Remove and discard aft cotter pin (7).
(2) Pull pin (8) slowly forward until clevis (5) and
three washers (9) are free.
(3) Push pin (8) aft until seated in idler (6).
c. Remove actuator (2) from bracket (10).
(1) Hold pin (11). Remove retaining ring (12).
(2) Remove pin (11) and spacers (13) and (14).
d. Remove nipple (3) from actuator (2).
e. Remove clevis (5) from actuator (2).
(1) Remove and discard cotter pin (15).
(2) Remove clevis (5).
GO TO NEXT PAGE
4
1
3
2
M04-1033-2
M04-1033-3
9
5
9
9
7
6
8
M04-1033-4
11
10
14
13
12
2
M04-1033-5
3
2
15
5