TM 1-1520-238-23
4-360
4.110.
NO. 1 OR NO. 2 ENGINE DRAIN MANIFOLD SUPPORT CLIP REPLACEMENT
4.110.1. Description
This task covers:
Removal. Installation.
4.110.2. Initial Setup
Tools:
Aircraft mechanics tool kit (item 376, App H)
0 - 30 inch-pound 1/4-inch drive dial indicator torque
wrench (item 445, App H)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access doors LN3 and LN4 or RN3 and
RN4 opened
NOTE
This task typical for engine No. 1 or No. 2
drain manifold support clips.
4.110.3. Removal
a. Remove drain manifold clamp (1) from drain
manifold clip (2).
(1) Remove nut (3) and washer (4) from screw
(5).
(2) Remove screw (5) from clamp (1) and clip (2).
b. Remove clip (2) from engine (6).
(1) Remove nut (7) from stud (8).
(2) Remove and discard clip (2).
GO TO NEXT PAGE
M04-3924-1
M04-3924-2
5
1
7
2
8
4
3
VIEW
ROTATED
6