TM 1-1520-238-23
4-583
4.169.
CPG POWER QUADRANT DISASSEMBLY/ASSEMBLY (AVIM) continued
(5) Remove locknut (22) and washer (23) from
power lever shaft (24).
(6) Remove shaft support plate (25) from quad-
rant (2).
(a) Remove two locknuts (26) and washers
(27) from screws (28).
(b) Remove two screws (28) from forward
end of support plate (25) and quadrant
(2).
(c) Remove locknut (29) and washer (30)
from screw (31).
(d) Remove screw (31) from aft end of sup-
port plate (25), washer (30), and quad-
rant (2).
(e) Remove two locknuts (32) and washers
(33) from screws (34).
(f) Remove two screws (34) from support
plate (25) and quadrant (2).
(g) Remove support plate (25) from quadrant
(2).
GO TO NEXT PAGE
22
23
24
M04-3927-5
29
30
25
26
27
M04-3927-6
2
31
32
33
34
28
30
25