MAIN ROTOR BLADE REMOVAL continued
Keep fingers and hands away from the
lead lag link. The main rotor blade
could move after the pins are re-
moved. A sudden blade movement
could sever or crush fingers or hands.
If injury occurs, seek medical aid.
To prevent damage to the attaching pin
when not installed on the aircraft, ensure
that the spring clip is disengaged.
Wear clean gloves (item 82, App F) when
handling lead lag link.
k. Unlatch and remove attaching pin (20).
(1) Push down on spring clip (21) to remove from
(2) Lift spring clip (21) out and away.
(3) Move two pins (20) up until free of blade root
(23) and lead lag link (24).
(4) Use crane to relieve grip pressure on blade
l. Install blade on handling adapter (para 1.83).
GO TO NEXT PAGE