TM 1-1520-238-23
Change 4
6-93
6.16.
NO. 7 (APU) DRIVE SHAFT AND ANTI-FLAIL SUPPORT REMOVAL/INSTALLATION continued
6.16.6. Installation
a. Install support (1) on shaft (10).
(1) Slide support (1) on shaft (10) with flat side
facing forward.
b. Install shaft (10) with support (1) on deck (11).
Torque bolts (12) and (14) to 125 INCH-
POUNDS.
(1) Position shaft between flanges (13) and (15).
Aline bolt holes.
(2) Install three bolts (14) through flange (15) and
shaft (10) flange.
(3) Install three bolts (12) through flange (13) and
shaft (10) flange.
(4) Torque bolts (12) and (14) to 125 INCH-
POUNDS. Use torque wrench adapter and
torque wrench.
(5) Apply corrosion preventive compound to
bolts (12) and (14). Use corrosion preventive
compound (item 62A, App F).
GO TO NEXT PAGE
M04-0457-8
1
10
14
15
10
13
12
M04-0457-5
1
11