TM 1-1520-238-23
6-532
6.128.
INTERMEDIATE GEARBOX IDENTIFICATION PLATE REPLACEMENT continued
6.128.4. Cleaning
CAUTION
Do not use trichloroethane, chlorofluoroethane, or any other product with chlor in name, for cleaning
titanium, magnesium, aluminium, or galvanized metals. Products with chlor in name are corrosive to
these metals.
NOTE
Do not allow alcohol to evaporate from surface. Discoloration will occur.
a. Clean identification plate mounting area on gearbox.
(1) Remove all cured compound from gearbox housing. Use isopropyl alcohol (item 106, App F) and cloth
(item 51, App F).
6.128.5. Inspection
NOTE
The following inspection procedures apply to identification plate mounting area on intermediate gear-
box.
a. Check for cracks. None allowed.
b. Check for corrosion (para 1.49).
c. Check for scratches, nicks, and gouges (para 6.121).
GO TO NEXT PAGE