INTERMEDIATE GEARBOX ACCELEROMETER REMOVAL/INSTALLATION continued
a. Clean removed and attaching parts or surfaces (para 1.47).
Unless otherwise specified, the following inspection procedures apply to the accelerometer recess and
adjacent surface areas on the intermediate gearbox housing.
a. Check for cracks. None allowed.
b. Check for corrosion (para 1.49).
c. Check for scratches, nicks, and gouges (para 6.121).
d. Check for stripped, crossed, or flattened threads. None allowed.
e. Check connector P59 and harness for cracks, corrosion, broken wires, bent, or broken connector pins,
and for cracked or burned insulation (TM 55-1500-323-24).
f. Check accelerometer for cracks, corrosion, damaged threads, bent, or broken body, and evidence of
overheating. None allowed.
GO TO NEXT PAGE