TM 1-1520-238-23
7-140.2
Change 5
7.40A.
DIRECTIONAL SERVOCYLINDER CLEVIS ASSEMBLY REPLACEMENT (AVIM) continued
7.40A.5. Inspection
a. Check removed and attaching parts for nicks,
scratches, rounded flats, and stripped or
damaged threads (para 7.1).
b. Check removed and attaching parts for corro-
sion (para 1.49).
7.40A.6. Assembly
a. Install clevis assembly (1) on servo actuator
(2). Torque bolts (5) and (3) to 155 INCH-
POUNDS.
(1) Aline clevis (1) on actuator (2).
(2) Install three bolts (5) through clevis (1) and
actuator (2).
(3) Install three nuts (6) on bolts (5).
(4) Aline clamp (4) with actuator (2).
(5) Install bolt (3) through clevis (1) in clamp (4).
(6) Hold three nuts (6) and torque bolts (5) to 155
INCH-POUNDS. Use torque wrench,
screwdriver bit set, and adapter.
(7) Torque bolt (3) to 155 INCH-POUNDS. Use
torque wrench, screwdriver bit set, and
adapter.
(8) Lockwire bolt (3) to clamp (4). Use wire
(item 226, App F).
b. Inspect (QA).
END OF TASK
M04-5136-2
3
5
2
6
4
1