TM 1-1520-238-23
9-106
9.28.
ELECTRICAL TEST PANEL CIRCUIT BREAKER REPLACEMENT continued
9.28.6. Installation
a. Install circuit breaker (10) on cover (6).
(1) Position circuit breaker so that tab (16) seats
in locator hole (17).
(2) Install lockwasher (15) and nut (14).
b. Attach wires (9).
(1) Install identified terminal lugs (13), washers
(12), and screws (11).
c. Inspect (QA).
d. Install cover (6).
(1) Tighten four captive screws (7) and washers
(8).
e. Install wire clamp (1) on rear of panel (2).
(1) Position clamp (1) on panel (2).
(2) Install screw (4), washer (5), and nut (3).
f. Inspect (QA).
g. Install access panel R200 (para 2.2).
h. Refer to circuit breaker reference list to per-
form appropriate maintenance operational
check (TM 1-1520-238-T).
END OF TASK
M04-1316-5
6
14
15
11
9
1310
16
12
17
8
7
M04-1316-6
6
7
8
M04-1316-7
4
5
1
3
2