MULTICHANNEL DIMMING CONTROLLER MODULE REMOVAL/INSTALLATION
To prevent mixing of modules, identify
module prior to removal for proper place-
ment during installation.
Unless all modules from the multichan-
nel dimming controller chassis are be-
ing removed and replaced, go to and
perform removal step applicable to
module being replaced.
If sponge vibration dampeners are
present between modules during re-
moval, save dampeners for module
d. Identify and remove module 1,1A (16) from
(1) Remove two screws (17) and washers (18)
from chassis (2).
(2) Remove module (16).
GO TO NEXT PAGE