TM 1-1520-238-23
9-320
9.87.
CPG INTR LT PANEL RESISTOR R3, R4, OR R5 REPLACEMENT (AVIM) continued
9.87.3. Removal
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
a. Remove resistor (1) from circuit card assem-
bly A1 (2).
(1) Identify and desolder wires (3) from resistor
(1). Use soldering iron (TM 55-1500-323-24).
(2) Remove two screws (4), washers (5), and
nuts (6).
(3) Remove and discard resistor (1).
9.87.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.87.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.61).
c. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-5081-2
6
5
1
4
2
3