ANTI-COLLISION LIGHT LENS REPLACEMENT continued
a. Clean removed and attaching parts (para
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.61).
c. Check removed and attaching parts for corro-
sion (para 1.49).
a. Install new lens (1) on housing (2).
(1) Apply adhesive to inner surface (7) on hous-
ing (2). Use adhesive (item 14, App F).
(2) Position lens (1) on housing (2).
Ensure adhesive fills gaps between lens
(3) Wipe off excess adhesive and allow to cure.
GO TO NEXT PAGE