PILOT OR CPG CAUTION/WARNING AND MASTER CAUTION/WARNING PANEL LIGHT SWITCH
REPLACEMENT (AVIM) continued
Advisory light switch is secured to mount-
ing sleeve by two integral screws. To pre-
vent damage to light assembly, do not
back screws out too far.
c. Remove light switch (5) from housing (2).
(1) Remove light switch (5) from mounting sleeve
(6), housing (2), and mounting spacer (7).
(a) Hold sleeve (6). Loosen two screws (8).
(b) Remove light switch (5) and spacer (7)
through front of housing (2).
(c) Remove sleeve (6) from rear of housing
a. Clean mounting area. Use cloth (item 52,
App F) and isopropyl alcohol (item 106, App F).
a. Check connectors for damaged pins, cracks,
cuts, or broken wires (para 9.104).
b. Check removed and attaching parts for dam-
age (para 9.104).
c. Check wires and terminals for wear, cracks,
and cuts (para 9.104).
d. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE