PILOT OR CPG CAUTION/WARNING AND MASTER CAUTION/WARNING PANEL LIGHT SWITCH
REPLACEMENT (AVIM) continued
Advisory light body is secured to
mounting sleeve by two integral
mounting screws. To prevent damage
to light assembly, do not over tighten.
To prevent damage to legends, lens
caps must be installed with top-to-top
and bottom-to-bottom as shown.
a. Install light switch (5) in housing (2).
(1) Position sleeve (6) over identified wires.
Sleeve must be positioned with long slot
down and side slots toward front of heli-
(2) Position and hold sleeve (6) behind panel (2).
(3) Position light switch (5) with TOP placard up.
(4) Install light switch (5) through spacer (7) and
panel (2) into sleeve (6).
(5) Tighten two screws (8).
GO TO NEXT PAGE