PILOT CAUTION/WARNING PANEL COIL L1 OR L2 REPLACEMENT (AVIM) continued
b. Remove coil (A106)L1 (10) from housing (2).
(1) Identify and desolder wires (11) from coil ter-
(2) Remove screw (13), nut (14), and washers
(15) and (16) from housing (2).
(3) Remove coil (10) from housing (2).
a. Clean coil mounting area on pilot caution/
warning panel housing. Use isopropyl alcohol
(item 106, App F), brush (item 34, App F), and
cloth (item 52, App F).
a. Check removed and attaching parts for dam-
age (para 9.104).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check for cracks. None allowed.
d. Check adjacent components for security of
attachment and loose mounting (para 9.104).
e. Check adjacent wiring and wire bundles for
cracked, broken, or burned insulation (para
f. Check adjacent wiring and wire bundles for
missing or broken tie wraps, chafing, wear,
cuts, and breaks (para 9.104).
g. Check for deposits of dust or foreign matter
anywhere inside pilot caution/warning panel
housing. None allowed.
GO TO NEXT PAGE