ELECTRONIC RELAY AND MODULE REPLACEMENT continued
a. Check removed and attaching parts for dam-
age (para 9.126).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.126).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check relay mount for cracks, nicks, or dam-
aged connections. None allowed.
The following steps are typical for all
single and double space relays.
a. Install relay (2) or (5).
(1) Insert relay (2) or (5) into relay mount (3).
(2) Push firmly on relay (2) or (5) until it seats.
b. Inspect (QA).
c. Perform maintenance operational check for
relay being replaced (TM 1-1520-238-T).
END OF TASK