TM 1-1520-238-23
10-532
Change 3
10.126.
NITROGEN INERTING UNIT (NIU) CONDITIONED AIR OUTLET HOSE
REMOVAL/INSTALLATION continued
10.126.6. Installation
a. Install hose (10). Torque nuts (14) and (12) to
120 INCH-POUNDS.
(1) Hold union (13). Install nut (14).
(2) Torque nut (14) to 120 INCH-POUNDS. Use
torque wrench.
(3) Hold fitting (11). Install nut (12).
(4) Torque nut (12) to 120 INCH-POUNDS. Use
torque wrench.
b. Install hose (1).
(1) Slide clamp (8) over free end of hose (1).
(2) Place end of hose (1) over vent (9).
(3) Slide clamp (8) into position to secure hose
(1) to vent (9). Tighten clamp (8).
GO TO NEXT PAGE
11
12
13
14
10
M04-2979-11A
M04-2979-8
8
9
1