LATERAL BELLCRANK AND LATERAL LINKS REMOVAL continued
FLIGHT SAFETY PART
Heat treated condition of lateral
bellcrank and lateral links is critical
to their serviceability. Any indica-
tion of heat oxidizing (discolor-
ation), where visually detectable,
requires replacement of the part.
These parts must be protected from
unscheduled heating and external
impact during inspection and other
To prevent injury to personnel or
damage to equipment, two persons
are required for lifting and remov-
ing the lateral bellcrank. If injury oc-
curs, seek medical aid.
g. Remove bellcrank (11).
h. Remove link (4) from bellcrank (11).
(1) Remove sealant from attaching hardware
(2) Remove and discard cotter pin (34).
(3) Hold bolt (35). Remove nut (36). Use open
end wrench and socket.
(4) Remove bolt (35), washers (37) (if installed),
bushing (38), and limiter (39).
GO TO NEXT PAGE