TM 1-1520-238-23
11-1002
11.234.
PILOT DIRECTIONAL CONTROL PEDAL PIVOT SUPPORT ASSEMBLY
REMOVAL/INSTALLATION continued
11.234.3. Removal
a. Remove covers (1) and (2) from airframe (3).
(1) Remove 15 screws (4) and washers (5).
(2) Remove bolt (6) and washer (5).
(3) Remove cover (1).
(4) Remove nine screws (4) and washers (5).
(5) Remove cover (2).
b. Remove rod (7) from pedal pivot support as-
sembly (8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11) and bushing (12) from sup-
port (8) and rod (7).
(4) Remove rod (7).
c. Remove support (8) from pedal crank (13).
(1) Remove and discard cotter pin (14).
(2) Remove nut (15).
(3) Remove bolt (16).
(4) Remove support (8).
GO TO NEXT PAGE
M04-4425-2
2
1
4
5
5
6
5
4
3
8
12
11
7
VIEW ROTATED
9
10
M04-4425-3
VIEW ROTATED
15
14
8
16
13
M04-4425-4