TM 1-1520-238-23
11-1030
11.242.
CPG DIRECTIONAL CONTROL PEDAL RELEASE SHAFT ASSEMBLY
REMOVAL/INSTALLATION continued
d. Install shaft (12) on crank (13).
(1) Aline shaft (12) with crank (13).
(2) Install bolt (16) and bushing (17) through
shaft (12) and crank (13).
(3) Check fit of self-retaining bolt (16) (para
11.1).
(4) Install nut (15).
(5) Install new cotter pin (14).
e. Install handle (6) on support (7).
(1) Aline handle (6) with support (7).
(2) Install bolt (11) through washer (10), handle
(6), and pedal support (7).
(3) Check fit of self-retaining bolt (11) (para 11.1).
(4) Install nut (9).
(5) Install new cotter pin (8).
f. Install cover (1) and shield (2) on panels (3).
(1) Aline cover (1) and shield (2) with panels (3).
(2) Install six nuts (4) and washers (5) on panels
(3).
g. Inspect (QA).
h. Perform directional flight control rigging
maintenance
operational
check
(TM 1-1520-238-T).
END OF TASK
12
11
13
6
8
7
10
9
M04-4436-6
14
15
16
17
5
4
2
1
M04-4436-7
3