TM 1-1520-238-23
Change 5
11-1077
11.257.
DIRECTIONAL F.S. 348 BELLCRANK REMOVAL/INSTALLATION continued
b. Remove aft push-pull rod (8) from bellcrank
(2).
(1) Remove and discard cotter pin (9).
(2) Remove self-locking nut (10) and sleeve
bushing (11).
(3) Remove close tolerance bolt (12).
(4) Remove rod (8).
c. Remove bellcrank (2) from bracket (14).
(1) Remove and discard cotter pin (15).
(2) Remove self-locking nut (16).
(3) Remove close tolerance bolt (17) and sleeve
bushing (18).
(4) Remove and discard cotter pin (19).
(5) Remove self-locking nut (20) and sleeve
bushing (21).
(6) Remove close tolerance bolt (22).
(7) Remove bellcrank (2).
(8) Remove ball bearing (23) from bellcrank (2).
GO TO NEXT PAGE
M04-1802-3A
2
12
8
11
10
9
M04-1802-4
2
22
18
17
16
15
21
20
19
14
M04-1802-5
23
2