TM 1-1520-238-23
11-1162
Change 7
11.275.
TAIL ROTOR DRIVE LINK INSTALLATION continued
b. Install opposite side of links (1). Torque nut (8)
30 to 40 INCH-POUNDS.
(1) Aline flanges at narrow end of links (1).
(2) Install sleeve bushing (3) through flanges of
links (1).
(3) Install bolt (4) through washer (5), large
spacer (10), links (1), and bushing (3).
(4) Install bracket (7) on bolt (4).
(5) Install self-locking nut (8). Torque nut (8) to 30
INCH-POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Verify axial play (para 11.232).
(8) Install new cotter pin (9).
GO TO NEXT PAGE
M04-1769-10B
1
4
5
10
1
3
7
9
8
VIEW ROTATED