TM 1-1520-238-23
11-1212
11.285.
RIGGING LONGITUDINAL FLIGHT CONTROLS BETWEEN PILOT AND CPG CYCLIC
STICKS continued
g. Install -9 rig pin (19) through rig pin holes (20)
and (21) in CPG cyclic stick base (22). Use
flight control rigging kit.
(1) If -9 rig pin (19) cannot be installed, adjust
forward end of F.S. 83 push-pull rod (23) to
aline rig pin holes (20) and (21) (para 11.2).
NOTE
Rig pins installed must be a drop-fit con-
dition in holes. (A slight drag of rig pin is
acceptable.)
h. Verify drop-fit of rig pins (11), (13), and (19).
i. Remove -9 rig pin (19) from CPG cyclic stick
base (22).
j. Remove -9 rig pin (13) from F.S. 97 bellcrank
(17) and bracket (15).
k. Remove -9 rig pin (11) from pilot cyclic stick
base (10) of stick (7).
l. Remove pilot cyclic stick warning cover (12).
GO TO NEXT PAGE
M04-3016-3
19
20
21
22
M04-3016-4
23
M04-3016-6
13
15
17
M04-3016-5
7
10
11
12
7