TM 1-1520-238-23
12-129
12.40.
FIRE EXTINGUISHER CARTRIDGE REMOVAL/INSTALLATION - continued
12.40.3. Removal
a. Remove wire (1) from ground stud (2).
(1) Identify wire (1) attached to ground stud (2).
(2) Remove shorting wire (3) from stud (2).
(3) Remove screw (4) and washer (5).
(4) Remove wire (1) from stud (2).
b. Install shorting wire (3) on stud (2).
(1) Install screw (4), washer (5), and wire (3) on
stud (2).
c. Remove wire (6) from actuation terminal (7).
(1) Identify wire (6) attached to actuation terminal
(7).
(2) Remove shorting wire (3) from terminal (7).
(3) Remove nut (8) and wire (6) from terminal (7).
d. Install shorting wire (3) on terminal (7).
(1) Wrap end of shorting wire (3) around terminal
(7).
(2) Install nut (8) on terminal (7).
GO TO NEXT PAGE
2
5
4
1
3
M04-997-2
2
5
4
6
3
M04-997-3
7
8