TM 1-1520-238-23
13-85
13.27.
AIR DUCT NO. 11 REMOVAL/INSTALLATION - continued
13.27.6. Repair
a. Remove gasket (7) from duct (1).
b. Clean duct (1) (para 1.47).
c. Install new gasket (7) on duct (1).
(1) Apply adhesive on mating surfaces of gasket
(7) and duct (1). Use adhesive (item 16,
App F).
(2) Position gasket (7) on duct (1).
13.27.7. Installation
a. Install duct (1) on ducts (2) and (3).
(1) Install two clamps (4) and sleeve (5) on duct
(2).
(2) Install two clamps (4) and hose (6) on duct
(3).
(3) Position duct (1) between ducts (2) and (3).
(4) Center sleeve (5) over ducts (1) and (2).
(5) Center hose (6) over ducts (1) and (3).
(6) Position clamps (4) over sleeves (5) and hose
(6).
(7) Tighten clamps (4).
b. Install air duct No. 10 (para 13.26).
c. Inspect (QA).
d. Install pilot anti-ice panel (para 12.47).
e. Tilt pilot seat back (para 2.161).
f. Perform ECS maintenance operational check
(TM 1-1520-238-T).
END OF TASK
M04-649-8
7
1
4
5
4
2
M04-649-6
1
M04-649-7
4
1
6
3