TM 1-1520-238-23
13-105
13.32.
FORWARD AVIONICS BAY AIR COOLING DUCT ASSEMBLY
REMOVAL/INSTALLATION - continued
13.32.3. Removal
a. Remove hose (1) from air ducts (2) and (3).
(1) Loosen two clamps (4).
(2) Remove hose (1) and two clamps (4).
NOTE
Left hand duct has four screws. Right
hand duct has three screws.
b. Remove air duct (3) from fuselage (5).
(1) Remove screws (6) and washers (7) from air
duct (3).
(2) Remove air duct (3).
13.32.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
13.32.5. Inspection
a. Check air duct and hose for cracks (para 13.1).
b. Check air duct seal for tears and gouges (para
13.1).
c. Check gasket on duct for cuts or gouges. Re-
place defective gasket.
d. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
3
M04-3891-2
5
2
7
6
4
1
4