PYLON RACK DISASSEMBLY/ASSEMBLY (AVIM) - continued
a. Check pylon rack components for corrosion
b. Check dowel pins for cracks or distortion.
Inspection of pylon rack shall be per-
formed internally and externally.
c. Check the left and right housing for cracks
(para 16.1). None allowed.
d. Inspection area for pylon rack shall be mount-
ing area around pivot point, extending out-
ward four inches onto rack surface (para 16.1).
e. Check internal component assemblies for
cracks. None allowed.
f. Check forward bellcrank for cracks using
magnifier. None allowed.
Replacement of the two dowel pins is typ-
ical for forward and aft pins.
a. Repair mounting bracket (5) by replacing
dowel pins (65).
(1) Position mounting bracket (5) in arbor press
(66) with pins (65) inside of mounting bracket
facing away from ram (67).
(2) Ensure driver (68) and pin (65) are alined.
Slowly press pins (65) out of mounting brack-
(3) Remove mounting bracket (5) from arbor
GO TO NEXT PAGE