TM 55-6930-214-10
Table 7-10.
Instructions for Use of Manual Target Control CRT Page - Continued
Range of
Command
value
Keystroke
Comments
TARGET ACTIVATE/REMOVE
- continued
09 MOTION
ON/OFF
09 ENTER
Enables pathway travel
for target site
reference numbers 1-5.
10 PATHWAY
0-5, 7
10 TAB N ENTER
N = 0 to 5,7. Defines
pathway target will
t r a v e l for site refer-
ence numbers l-5, and 7
for air pathway.
11 SPEED
0 - 40 (ground)
11 TAB N ENTER
N = 0 to 40/200. K i l o -
0 - 200 (air)
meters per hour in 10-kph
increments.
12 ACTIVATE
12 ENTER
Inserts target into simu-
TARGET
lation and activates
motion/hostility.
13 REMOVE TARGET
13 ENTER
Deletes target from
simulation.
99 REMOVE ALL
99 ENTER
Deletes all targets from
TARGETS
simulation.
TARGET HOSTILITY EDIT
14 TARGET
1 - 10
14 TAB N ENTER
N = 1 to 10. Site refer-
REFERENCE NUMBER
ence number on target
status page. Used to
count targets being
inserted.
15 HOSTILITY
0-1
N - 0 to
1. 0 for
15 TAB N ENTER
hostility
off and 1 for
hostility
on for
selected
target.
16 HOSTILITY
0-1
N= 0 to 1. 0 for
16 TAB N ENTER
EDIT FOR ALL
hostility off and 1 for
TARGETS
hostility on for all
active targets.
TARGET MOTION EDIT
17 TARGET
1 - 10
N= 1 to 10. Site
17 TAB N ENTER
REFERENCE NUMBER
reference number on
target status page.
Used to count targets
being inserted.
Change 1
7-106