ROUTINE
MWO effective date is 15 November 2002 and completion date is 15 November 2006
MWO 1-1520-251-20-01
MODIFICATION WORK ORDER
MODIFICATIONOF
ATTACK HELICOPTER AH-64D TO REPLACE
M43 SLIDE MOUNT BRACKET ASSEMBLY P/N 5-1-1317 WITH
M48 BRACKET ASSEMBLY, KEVLAR PANEL P/N 5-1-3502
NSN 1520-01-4 5 5 - 8 2 5 0
U.S. Army Aviation and Missile Command
19 December 2002
You can improvethis manual. If you find any mistakes or if you know of a way to improve these
procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to
Publications and Blank Forms), or DA Form 2028-2 located in the back of this manual, directly
to: Commander, U.S. Army Aviation and Missile Command,
Arsenal, AL
A reply will be furnished to you. You may also provide
DA Form 2028 informationto AMCOM via e-mail, fax, or the World Wide Web. Our fax number
or Commercial
Our e-mail address is:
is:
DSN
2028@redstone.army.mil. Instructionsfor sendingan electronic 2028 may be found at the back
of this manual immediately preceding the hard copy 2028. For the World Wide Web use:
https://amcom2028. redstone.army.mil.
I
DISTRIBUTION STATEMENT A: Approved for public release: distribution i unlimited.
s
1. PURPOSE: The purpose of this modification is to provide instructions for the removal of the
gunner (CPG) crew
current slider plate on the left armored wing of the pilot and
seats, and for installation of a new slider plate in the same location to provide an interface to
accommodate the M48 Mask Lighter Weight Motor Blower.
2. PRIORITY This modification is classified ROUTINE.
END ITEM OR SYSTEM TO BE MODIFIED:
3.
a. Aircraft having the following National Stock Numbers will be modified in accordance with
NOMENCLATURE
NSN
RANGE
Helicopter
All US Army
Aircraft
b. Aircraft modified during validation verification.
6.