TB 1-1520-238-20-130
3. ASSEMBLIES/COMPONENTS/PARTS AFFECTED
3.1 Suspect/discrepant assemblies/components/parts
NOMENCLATURE
PN
NSN
SHOCK STRUT, MAIN LANDING GEAR
1168100-505
SHOCK STRUT, MAIN LANDING GEAR
1168100-507
3.2 Additional assemblies/components/parts to be inspected
NOMENCLATURE
PN
NSN
LANDING GEAR ASSEMBLY
1168000-509 (LH)
N/A
LANDING GEAR ASSEMBLY
1168000-510 (RH)
N/A
LANDING GEAR ASSEMBLY
1168000-511 (LH)
N/A
LANDING GEAR ASSEMBLY
1168000-512 (RH)
N/A
NOTE
When complying with the requirements of this TB, complete forms
and records entries IAW DA PAM 738-751. ULLS-A units will use ap-
propriate "E" forms.
4. INITIAL TAMMS (THE ARMY MAINTENANCE MANAGEMENT SYSTEM) COMPLIANCE REQUIRE-
MENTS
4.1 Upon receipt of this TB, make the following entry on the DA Form 2408-13-1. Enter a Red Horizontal
Dash status symbol with the following statement: "Comply with the requirements of AH-64-03-ASAM-01
and TB 1-1520-238-20-130 before [####.#] aircraft hours, but NLT (27 November 2002)." (Calculate [####.#]
as current aircraft flight hours plus 10 hours). Commanders who are unable to comply with the requirements
of this TB within the time frame specified will upgrade the affected aircraft status symbol to a red X.
NOTE
The TAMMS compliance reporting form is available at "www.reds-
tone.army.mil/sof/tamms.xls" (use lower case letters only) or may be
obtained from the units servicing LAR. Alternate forms may be ap-
proved by the AMCOM SOF Compliance Officer.
NOTE
The TAMMS Compliance Report only confirms the unit has made
the initial logbook entry for assigned aircraft. TAMMS Compliance
Reports will incude aircraft serial numbers (in numerical order), date
of entry on DA Form 2408-13-1, unit address, local POC name and
phone number.
4.2 TAMMS Compliance Reports Submit TAMMS Compliance Report via priority email to "safe-
adm@redstone.army.mil" NLT (20 November 2002) IAW AR 95-1. If email is not available, the report may
be faxed to: SOF Compliance Officer at DSN 897-2111 or (256) 313-2111.
2
