TB 1-1520-251-20-12
1.
GENERAL INFORMATION.
ACCESSORY KIT, ROTOR TRACK & BALANCE
ACCESSORY KIT, ROTOR TRACK & BALANCE
NSN: 4920-01-328-8013
NSN: 4920-01-517-3110
P/N: 7-262100008-613
P/N: 7-262100008-615
Remove
Add
P/N
ITEM
QTY
P/N
ITEM
QTY
NSN
NSN
7-262110079
Cable, Umbilical
1
7-562117009-001 Bracket, Accel-Clutch-APU-
1
None
AVA
7-262110037
Target Set, Blade Tip,
1
7-562110073-603 Container, Handling/Storage
1
1680-01-253-2888 MR Track & Balance
None
Rotor Track&Bal
Note1
7-362100092
Cable
Assy,
1
7-562110225-601 Adapter, Laser, Acc Kit-Rtr
1
6150-01-474-8680 Extension
4920-01-474-8671 Track&Bal
Note2
7-362110211
Adapter, Power Cord-
1
LAS-200-635-5 LAS Series Laser
1
TBD
Tail Rotor Balancer
Note2
LS5
9 VDC Battery Supply
1
Note2
LS6
Wall Transformer
1
None
Note2
HS5572-0001
Plate, Assy, Component
1
5340-01-471-1168 Listing
HS5216-2
Plate, Identification
1
1.1
The APU Clutch Accelerometer AVA Bracket required to perform this modification has been
provided by Boeing to the units (see table below) because of the SOF AH-64-04-01 and P00114.
Units receiving these support equipment shall perform this modification. The data plates will re-
identify the AH-64A/D Kit. All components removed from the kit shall be dispositioned as directed
by USG.
1.2
For units with the 7-262100008-613 Rotor Track and Balance Accessory Kit with the 7-
262110073-605 wooden Storage and Handling Container, cut a cavity 1" L X 1" W X 1" Deep at
the approximate area shown in Figure 1 for the APU Clutch Accelerometer AVA Bracket.
1.3
For units with the 7-262100008-615 Rotor Track and Balance Accessory Kit with the 7-
562110073-603 roto-molded polyethylene Storage and Handling Container, cut a cavity 2" L X 2"
W X 12" Deep at the approximate area shown in Figure 2 for the 105R Laser. Container has a
provision the LAS Laser and 7-562110225-601 Laser Adapter.
Note 1: 7-562110073-603 Rotor Track and Balance Accessory Storage and Handling Container is the
preferred container for the 7-262100008-615 Rotor Track and Balance Accessory Kit. The 7-
262110073-605 Rotor Track and Balance Accessory Storage and Handling Container is an
alternate container.
Note 2: Support equipments above are the alternate equipments in the old 7-262100008-613 Rotor Track
and Balance Accessory Kit. Equipments are a direct replacement of 105R Laser and 100B
Battery Pack that are obsolete.
2
