TM 1-1520-238-23
1-142
Change 2
1.45.
MAIN LANDING GEAR BRAKE SYSTEM – SERVICE/BLEED – continued
e. Install bleeder hose (7) to pilot station master
cylinder (8).
(1) Remove lockwire.
(2) Remove screw (9) and seal (10) from port
(11). Discard seal (10).
(3) Install hose (7) with adapter (12) in port (11)
on master cylinder (8).
(4) Place outlet end of hose (7) in pail.
f. Bleed pilot station master cylinder (8).
(1) Fill master cylinder (8) through wheel brake
cylinder (2) until overflow into pail is free of
bubbles. Use filler and bleeder.
CAUTION
Overservicing the brake hydraulic system
may cause system damage.
NOTE
A small amount of fluid can be expected
to seep from the check valve weep hole,
especially if the brake system is over-
serviced with fluid.
GO TO NEXT PAGE
M04-1620-7A
8
11
10
9
8
11
12
7
7
M04-1620-20
2
