TM 1-1520-238-23 Change 11 1-171 1.53. AIRCRAFT AND AIRCRAFT COMPONENT WASHING, CLEANING, AND FRESH WATER RINSE PROCEDURES – continued Table II. Cleaning of Specific Areas and Components Item No. Area or Component Type of Soil Cleaning Agent or Compound & Nomenclature Mixing Directions Cleaning Procedures WARNING If cleaning compound is splashed in eyes, rinse thoroughly with fresh water for 15 minutes and report to medical facility. Remove clothing saturated with cleaning compound immedi- ately and flush exposed skin areas with fresh water. CAUTION Open all circuit breakers associated with battery power (TM 1-1520-238-T) prior to application of dry cleaning solvent (item 74, App F). 1. Painted exterior surfaces (to include fwd, ctr, and aft fuselage, wings, nacelles, stabilizer, stabilator, tailboom, FABs, kevlar fairings). Light soils (dirt, dust, mud, salt, loose soot) Cleaning compound (item 44, App F) 1 part cleaner in 9 parts water Apply cleaning compound (item 44, App F) with foam generator, spray, sponge, soft brush, or cloth. Scrub (if necessary) and then rinse with fresh water and dry. 2. (same as 1) Moderate oils, (hydraulic fluids, lube oils, light preservatives) Cleaning compound (item 44, App F) 1 part cleaner in 4 parts water Apply cleaning compound (item 44, App F) with foam generator spray, sponge, soft brush, or cloth. Rub gently with a circular motion for up to 1 minute. Rinse with fresh water and dry. GO TO NEXT PAGE