TM 1-1520-238-23
Change 8
1-184.1/(1-184.2 blank)
1.53.
AIRCRAFT AND AIRCRAFT COMPONENT WASHING, CLEANING, AND FRESH WATER RINSE
PROCEDURES
1.53.8. Aircraft Wash Frequency (specific conditions)
a. The following cleaning frequency shall be applied for aircraft.
(1) Cleaning will be accomplished after aircraft have been subjected to any of the following conditions:
(a) Spilled electrolyte or corrosive deposits around battery terminals and general vicinity of the battery
area.
(b) Exposed to corrosive fire extinguishing materials.
(c) Exposed to salt water spray.
WARNING
Keep corrosion preventive compound MIL–C–81309 away from all sources of ignition. Avoid
eye and skin contact. Avoid inhalation. This material will displace oxygen in enclosed
spaces.
Avoid eye or skin contact with general purpose preservative VVL–L–800. Avoid inhalation
and ingestion.
Avoid eye or skin contact with hydraulic fluid, MIL–H–83282. Avoid inhalation or ingestion.
Use with adequate ventilation. Wash hands after handling.
NOTE
In the absence of the specific conditions noted above, the aircraft wash frequency will be in
accordance with the guidance provided in Section VIII of TM 1-1500-328-23 and
TM 1-1500-344-23, as supplemented by local installation/unit standard operating procedures.
Frequent wipe down is recommended for actuating rods of hydraulic cylinders using MIL–H–83282
hydraulic fluid.
END OF TASK
