TM 1-1520-238-23
Change 8
Index 47
Subject
Para No.
Subject
Para No.
Defrosting, Anti-Icing, De-Icing, and . . . 1.54
Defueling – Closed Circuit Refueling
(CCR) Method . . . . . . . . . . . . . . . . . . . . 1.20
Defueling – Gravity Method . . . . . . . . . . . 1.21
Defueling – Single Point Adapter (SPA)
Method . . . . . . . . . . . . . . . . . . . . . . . . . . 1.19
De-Ice Brush and Shunt Replacement
(AVIM), Tail Rotor . . . . . . . . . . . . . . . . . 11.279
De-Ice System Inspection, Anti-Ice/ . . . . 12.46
Demand Spindle (LDS) Cables,
Warm-Up/De-Ice of Engine Load . . . . 1.55
Demand Spindle Aft Cable Removal,
No. 1 Engine Load . . . . . . . . . . . . . . . . 4.176
Demand Spindle Aft Cable Removal,
No. 2 Engine Load . . . . . . . . . . . . . . . . 4.178
Demand Spindle Gearbox Main Sleeve
and Runout Tube
Removal/Installation, No. 1 or No. 2
Engine Load . . . . . . . . . . . . . . . . . . . . . 4.144A
Demand Spindle/Power Available
Spindle Aft Cable Spring Tension Clip
Removal/Installation, No. 1 Engine
Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.180
Dent and Depression Repair, Tail Rotor
Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.56
Dent, Depression, and Crease Repair
(AVIM), Main Rotor Blade . . . . . . . . . . 5.5
Depreservation, Auxiliary Power Unit
(APU) . . . . . . . . . . . . . . . . . . . . . . . . . . . E.12
Depression Repair, Tail Rotor Blade
Dent and . . . . . . . . . . . . . . . . . . . . . . . . 5.56
Depression, and Crease Repair (AVIM),
Main Rotor Blade Dent, . . . . . . . . . . . . 5.5
Description and Data Scope, Equipment
1.8
Description of Major Components,
Location and . . . . . . . . . . . . . . . . . . . . . 1.9
Desert Operation Provisions Description
and Operation . . . . . . . . . . . . . . . . . . . . 16.34
Designation Sight (TADS) Cleaning,
Target Acquisition . . . . . . . . . . . . . . . . . 1.46
Desired Deck Angle, Positioning
Helicopter for . . . . . . . . . . . . . . . . . . . . . 1.133
Destruction of Army Material to Prevent
Enemy Use . . . . . . . . . . . . . . . . . . . . . . 1.3
Detection System Inspection, Fire . . . . . 12.16
Detector Control Amplifier
Replacement, Engine Flame . . . . . . . 12.26
Detector Inspection, Engine Nose
Gearbox Metallic Chip . . . . . . . . . . . . . 6.25
Detector Inspection, Main Transmission
Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.45
Detector Removal/Installation, Engine
Nose Gearbox Metallic Chip . . . . . . . . 6.26
Detector Replacement, Engine Flame . . 12.23
Detector Replacement, Main
Transmission Chip . . . . . . . . . . . . . . . . 6.46
Detector Signal Processor Probe
Oscillator Reference or Rate Output
CCA Replacement (AVIM), Ice . . . . . . 12.62
Detector Signal Processor
Removal/Installation, Ice . . . . . . . . . . . 12.59
Device CR1, CR2, CR3, CR5, CR7,
CR8, or CR9 Replacement (AVIM),
Pilot EXT LT/INTR LT Panel
Semiconductor . . . . . . . . . . . . . . . . . . . 9.65
Differential Pressure Switch (Lockwired
Type) Removal/Installation, Engine
Nose Gearbox Oil Filter Bowl,
Strainer Element, and . . . . . . . . . . . . . 6.18
Differential Pressure Switch (Lockwired
Type) Removal/Installation, Main
Transmission Filter Bowl, Element
and . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.61
Differential Pressure Switch (Retainer,
Ringed Type) Removal/Installation,
Engine Nose Gearbox Oil Filter Bowl,
Strainer Element, and . . . . . . . . . . . . . 6.19
Differential Pressure Switch (Retainer,
Ringed Type) Removal/Installation,
Main Transmission Filter Bowl,
Element, and . . . . . . . . . . . . . . . . . . . . . 6.62
Diffuser (One-Piece)
Removal/Installation, Engine Input
Drive Shaft and Outer . . . . . . . . . . . . . 6.2
Diffuser (Two-Section)
Removal/Installation, Engine Nose
Gearbox Outer . . . . . . . . . . . . . . . . . . . 6.32
