TM 1-1520-238-23
3-246
3.62.
BRAKE CONTROL VALVES REMOVAL/INSTALLATION continued
g. Remove tubes (17) and (18) from tube rotary
direct valve (19) and valves (6).
(1) Hold two tube nipples (20). Remove tube
coupling nuts (21).
(2) Remove two tube coupling nuts (22) from two
tube elbows (23).
(3) Remove tubes (17) and (18) from valves (19)
and (6).
h. Remove two valves (6) from bracket (24).
(1) Hold two screws (25). Remove two self-lock-
ing nuts (26) and washers (27).
(2) Remove two screws (25).
(3) Remove two valves (6) from bracket (24).
NOTE
Perform step i if replacing valve.
i. Remove nipples (7) and (15) and elbows (23)
from valves (6).
(1) Remove two nipples (7) and (15).
(2) Remove and discard four packings (28).
(3) Loosen two nuts (29). Remove two elbows
(23).
(4) Remove and discard two packings (30).
3.62.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
GO TO NEXT PAGE
M04-3056-6
17
22
26
22
23
6
24
19
20
21
21
27
18
25
6
28
15
28
30
29
23
29
28
7
M04-3056-7