TM 1-1520-238-23
Change 4
3-277
3.66.
SINGLE DISK BRAKE, FRICTION LINING, AND BRAKE DISK REMOVAL/INSTALLATION
(GOODYEAR/ABSC) continued
f. Aline bolt holes in housing (3) with bolt holes
in flange (5).
g. Install eight bolts (4). Torque bolts (4) to 360
INCH-POUNDS.
NOTE
Ensure recessed side of washers are
installed against bolt heads.
(1) Install eight bolts (4) and washers (8) through
housing (3) and flange (5).
(2) Hold eight bolts (4). Install washers (7) and
nuts (6).
(3) Hold eight nuts (6). Torque bolts (4) to 360
INCH-POUNDS. Use torque wrench.
h. Apply corrosion preventive compound on
bolts (4), nuts (6), washers (7), and washers
(8). Use corrosion preventive compound
(item 62A, App F).
i. Install nut (1) on nipple (2). Torque nut (1) to 120
INCH-POUNDS.
(1) Hold nipple (2). Install nut (1).
(2) Hold nipple (2). Torque nut (1) to 120 INCH-
POUNDS. Use torque wrench.
j. Inspect (QA).
k. Install main landing gear wheel and tire (para
3.6).
l. Bleed brake system (para 1.45).
m. Set parking brakes (para 1.61).
n. Perform main landing gear maintenance op-
erational check (TM 1-1520-238-T).
END OF TASK
M04-133-15
8
4
7
6
5
3
1
2
M04-133-16
