TM 1-1520-238-23
2-209
2.64.
PILOT STATION ACCESS DOOR MECHANISM REPAIR (AVIM) – continued
l. Remove bracket (45) from door (2).
(1) Remove four screws (46) and washers (47)
from bracket (45).
(2) Remove bracket (45) from door (2).
m. Remove groove pulley (48) from bracket (45).
(1) Remove and discard cotter pin (49).
(2) Remove straight headed pin (50), washer
(51), and pulley (48) from bracket (45).
(3) Pull cable (22) through door (2) and free of
bracket (45).
(4) Remove pulley (48) from bracket (45).
n. Remove connecting link (52) from aft locking
bar (53).
(1) Remove and discard cotter pin (54).
(2) Remove straight headed pin (55) and washer
(56).
(3) Remove link (52) from bar (53).
o. Remove bar (53) from door (2).
(1) Install retention tool on locking bar mecha-
nism (57).
(2) Hold clevis bolt (58). Remove nut (59), wash-
er (60), and sleeve bushing (61).
(3) Remove bolt (58) and sleeve bushing (62).
GO TO NEXT PAGE
M04-1435-11
45
22
47
46
2
45
51
49
22
48
50
VIEW ROTATED
M04-1435-12
53
55
52
56
54
M04-1435-13
2
53
58
62
61
60
59
RETENTION TOOL
57
